DR310 - Drill Modules

Powerful. Durable. Proven.
310 CFM @ 200 PSI of Air Power

The compact DR 310 provides an impressive 310 CFM and 200 PSI of air power. Ideally suited for shallow wells where low pressure, low flow is required, the module can be hydraulically or engine driven. Designed for easy maintenance when mounted on the vehicle the DR310 is readily available and steadfastly supported by Vanair’s expansive service team to keep you up and running!

  • Literature
  • Specifications
  • Special Features
  • Options
  • Hydraulic System Requirements
  • Parts

Download Literature

Download Drill Compressor Modules Literature

Bid Specifications - DR310

Warranty

Air Compressor

  DR310
Rated Capacity 310 CFM (8.4 m3/min)
Pressure Up to 200 PSI (13.8 Bar)
RPM Input 2500 RPM
Input BHP Required Up to 108 HP (81 kW)

Physical Specifications

  DR310
Compressor Module Weights 1385 Lbs.
Separator Tank Weights 190 Lbs.

Fan Power Requirements

  DR310
Fan Drive Method Compressor Input Shaft

Compressor Dimensions with fittings (In.)– 46 L x 30.0 W x 30 H*

Separator Tank Dimensions with fittings (In.)– 14 Dia. x 39 H

Dimensions listed are not a complete representation of total space necessary. Please consult Vanair for overall space and air requirements.

 

PERFORMANCE

  • 310 CFM and 200 PSI
  • Industry Leading Rotary Screw Air Compressor
  • Compact Design
  • Easy to Operate and Maintain
  • Simple Controls and Piping
  • Built for Harsh Environments
  • Made in the USA

AIR COMPRESSOR

  • Rotary Screw Air Compressor
  • Single-Stage
  • Field Proven Performance
  • Recirculating Valve for Noise Reduction
  • Discharge Pipe SAE 2.5-Inch Code 61 Flange with Leak-Free Fittings

DISCHARGE TANK

  • Vertical Design for Smaller Footprint and Angle of Operation
  • In-Tank Coalescer for Longevity
  • Minimum Pressure Valve
  • Pressure Relief Valve
  • Oil Scavenge Sight Glass
  • Coalescer Restriction Indicator

AIR-TO-OIL COOLER

  • Ambient Operating Range of -20 °F to +120 °F

AIR FILTER

  • Dual Two-Stage Air Filters with Dust Evacuators for Clean Air
  • Air Restriction Indicator

INSTRUMENTATION

  • Conveniently Located, Easy-to-Read Temperature and Pressure Gauges
  • Oil Level Sight Glass

SERVICEABILITY

  • Easily Accessible Air Filters and Coalescers for Routine Service
  • Independent Separator Tank for Ease of Maintenance
  • Hinged–Top Roof and Access Panel for Maintenance and Adjustments
  • Dust Evacuator for Easy Filter Maintenance

SAFETY

  • High-Pressure Shutdown
  • Air Pressure Relief Safety Valve
  • Automatic Blowdown on Shutdown
  • Oil Fill Plug Safety Relief
  • Minimum Pressure Valve

CONVENIENCE

  • Mounting Provisions on the Bottom of the Frame
  • Heavy Duty Frame with Integral Forklift Tubes
  • Powder Coated, Galvanneal Sheet Metal Enclosure

  • Drive Hub
  • Adapter for hydraulic motor
  • SAE “D” face adapter
  • Vanguard HP High Pressure Two Stage Rotary Screw Compressor Oil 300-500 PSI, 55 Gal, #275691-55 gal

All hydraulic ratings and pressures are at the machine and do not take into account the pressure drops of individual hydraulic systems. These pressure drops need to be taken into account and added to the rating of the hydraulic pump and components. Vanair highly recommends consulting a hydraulic supply expert for specifying the correct hydraulic pump size and type, oil reservoir size, hydraulic cooler, hydraulic pressure relief, and other hydraulic supply components for your application. Please take into consideration the following: The hydraulic flow and pressure requirements of the air compressor, the continuous hydraulic load when the compressor is running, the duty cycle and ambient operating temperatures, and any other hydraulic equipment that may share the same hydraulic supply system (Vanair recommends a dedicated pump and hydraulic circuit).

Coming Soon